Filling and Maintaining Your Colibri Lighter
Colibri lighters are known for their quality and reliability. To keep them functioning smoothly, follow these steps for filling and maintenance:
Filling:
1. Locate the filling valve: Most Colibri lighters have a valve on the bottom or side. It might be hidden under a cap.
2. Turn the lighter upside down: This ensures the valve is in the correct position for filling.
3. Insert the butane nozzle: Align the nozzle with the filling valve and press firmly.
4. Fill slowly and steadily: Listen for the hiss of butane entering the lighter. Don't overfill! Stop when the lighter feels full or when butane starts to leak.
5. Remove the nozzle: Once filled, release the pressure and remove the nozzle.
6. Wait a few minutes: Allow the butane to settle before using the lighter.
Maintenance:
1. Clean the nozzle: Use a small brush or a thin piece of cloth to remove any debris from the nozzle.
2. Adjust the flame: Use the adjustment screw on the side of the lighter to fine-tune the flame height.
3. Check the flint: Replace the flint when it's worn down.
4. Clean the wick: If the flame is uneven or weak, the wick may need cleaning. Remove the wick and use tweezers to clean the cotton.
5. Check for leaks: If you notice any butane leaking, tighten the filling valve or replace the gasket.
6. Store in a cool, dry place: Avoid exposing your lighter to extreme temperatures or humidity.
Tips for optimal use:
* Keep the lighter upright: Don't store it on its side or upside down.
* Use high-quality butane: Avoid cheap butane, as it can damage the lighter.
* Don't overfill: This can lead to leaks and damage.
* Use a lighter fluid: Some Colibri lighters require specific lighter fluid. Refer to the user manual for instructions.
Important Note: Always follow the safety instructions provided with your Colibri lighter.
By following these steps, you can keep your Colibri lighter in top condition and enjoy its reliable performance for years to come.